TANA Hammerhead D waste shredder
- Engine Power: 399 kW (535 bhp)
- Nominal Torque: 310 kNm
- Rotor length: 3000 mm
TANA Hammerhead E — Electric Waste Shredder for Sale in UAE & GCC
The TANA Hammerhead E is a high-performance electric waste shredder engineered for industrial recycling facilities, transfer stations, and material recovery operations across the UAE and GCC that demand high-capacity, low-emission waste processing with significantly reduced operating costs and noise levels. Combining TANA’s advanced shredding technology with a dual electric motor drive system rated at up to 2 × 175 kW, the Hammerhead E delivers 310 kNm of nominal torque at a rotor speed of 37 RPM optimised for high-throughput processing of municipal solid waste, wood waste, light plastics, green waste, and mixed industrial material with maximum efficiency and minimum energy consumption.
Where the TANA Shark series is engineered for the toughest, most abrasive waste streams at slow rotor speeds, the TANA Hammerhead E is purpose-built for high-volume, high-speed processing of lighter waste fractions — making it the ideal electric industrial shredder for UAE recycling facilities and transfer stations that need to process large volumes of material quickly, cleanly, and cost-effectively without the emissions, noise, and fuel costs of a diesel-powered alternative. Its robust heavy-duty construction, intelligent automation systems, and energy-efficient electric drivetrain deliver continuous high-productivity operation across every shift positioning the Hammerhead E as the benchmark electric recycling shredder for modern waste management operations across the UAE.
| Specification | Detail |
|---|---|
| Rated Power (SAE J1995) | 2 × 160 kW / 2 × 175 kW |
| Nominal Torque | 310 kNm |
| Rotor Length | 3,000 mm |
| Rotor Max. Speed | 37 RPM |
| Rotor Diameter | 920 mm |
| Rotor Knives | 33 knives or 44 knives |
| Drive System | Fully Electric — Dual Motor |
| Operation Type | Stationary / Fixed Facility |
The TANA Hammerhead E’s 37 RPM rotor speed — significantly faster than the Shark series’ slow-speed configuration — is optimised for high-throughput processing of lighter waste fractions including municipal solid waste, green waste, wood, light plastics, and mixed commercial waste. Where maximum volume throughput is the primary operational objective, the Hammerhead E’s higher rotor speed delivers faster material processing rates than slow-speed alternatives, making it the preferred electric industrial shredder for high-capacity UAE recycling facilities and transfer stations handling large daily incoming waste volumes.
The Hammerhead E’s dual electric motor configuration delivers up to 310 kNm of nominal torque with zero direct exhaust emissions and significantly lower noise output than equivalent diesel-powered shredders. For UAE recycling facilities operating under environmental compliance requirements, located near populated areas, or working toward sustainability and Green Economy targets, the Hammerhead E eliminates diesel fuel dependency entirely — reducing energy costs, removing exhaust emission risks, and creating a safer, quieter working environment for operators and facility staff across every shift.
The TANA Hammerhead E integrates advanced onboard automation systems that continuously monitor rotor load, material feed rate, and shredding performance — automatically optimising rotor speed, initiating intelligent reverse cycles to clear blockages, and protecting the machine from overloading caused by non-crushable material. This intelligent control reduces operator dependency, prevents costly unplanned stoppages, and maximises productive uptime across continuous-operation UAE recycling facilities with minimal manual intervention required.
The TANA Hammerhead E is engineered to handle the widest range of lighter and medium-density waste streams encountered across UAE industrial parks, municipal facilities, and recycling operations — including municipal solid waste, green waste, wood and pallets, light plastics, mixed commercial and industrial waste, construction debris, tyres, and bulky waste. Interchangeable knife configurations of 33 or 44 rotor knives allow operators to optimise the Hammerhead E for each specific material type and output size requirement.
Every component of the TANA Hammerhead E — from the dual electric motors and rotor system to the conveyor and structural frame — is built to TANA’s proven heavy-duty standards for reliable, continuous operation in the demanding ambient temperatures and dusty environments characteristic of UAE industrial and recycling facilities. Extended service intervals, fast knife change systems, and ergonomic maintenance access points minimise planned downtime and maximise productive operating hours across every deployment.
The Hammerhead E’s electric drive system consumes significantly less energy per tonne of material processed compared to diesel-powered alternatives, directly reducing operational energy costs under UAE industrial electricity tariffs. Combined with zero direct emissions and lower noise output, the Hammerhead E supports UAE sustainability objectives, environmental compliance requirements, and corporate ESG commitments — making it the most responsible high-capacity electric recycling shredder choice for forward-thinking waste management operations across the UAE and GCC.
The TANA Hammerhead E offers a wide range of customisation options across knife configurations, screen sizes, conveyor specifications, and operational settings — allowing Al Shirawi’s technical team to configure the machine precisely for your specific waste stream, output size requirement, facility layout, and throughput targets across any UAE or GCC location.
As the authorised TANA distribution and aftersales partner for the UAE, Al Shirawi Enterprises provides end-to-end support for the TANA Hammerhead E — from initial site assessment and procurement through to machine delivery, electrical commissioning, operator training, and long-term preventive maintenance. No other organisation in the UAE combines TANA-authorised technical expertise with in-country spare parts inventory and a dedicated field service network of this depth.
Al Shirawi maintains in-country inventory of genuine TANA Hammerhead E rotor knives, wear components, and critical spare parts — eliminating international procurement lead times and ensuring your shredder is back in full production as rapidly as possible following any maintenance event.
Our specialist technical team manages full site electrical assessment, machine installation, commissioning, and comprehensive operator training — ensuring your TANA Hammerhead E is optimally configured for your waste stream, output requirements, and facility electrical infrastructure from the very first shift.
Structured preventive maintenance programmes cover scheduled knife replacements, rotor inspections, electrical system diagnostics, and performance calibration — protecting your Hammerhead E’s long-term operational efficiency and controlling total maintenance costs across its service life in UAE conditions.
Al Shirawi’s field service network covers all seven UAE emirates, providing rapid-response breakdown support, genuine spare parts delivery, and technical guidance wherever your TANA Hammerhead E is operating from Dubai and Abu Dhabi to industrial facilities across Sharjah, Ras Al Khaimah, Fujairah, and beyond.
The TANA Hammerhead E fully electric waste shredder is the preferred high-throughput industrial shredding solution for recycling facilities, transfer stations, and material recovery facilities across the UAE and GCC that require high-speed, high-volume, low-emission electric waste processing for lighter and medium-density waste streams with continuous operational reliability and significantly lower energy costs than diesel-powered alternatives. The Hammerhead E processes municipal solid waste for volume reduction and landfill diversion, green waste and wood for biomass fuel or composting pre-treatment, light plastics and mixed packaging waste, mixed commercial and industrial waste, construction debris, tyres, and bulky waste with consistent high-throughput output quality across every shift. Its fully electric drive, intelligent automation, and heavy-duty construction make it equally suited for enclosed UAE recycling facilities and material recovery facilities, high-capacity municipal transfer stations, industrial park waste processing centres, and free zone waste management operations where maximising volume throughput per shift, minimising operating costs, and meeting environmental compliance standards are equally critical operational priorities.
| Requirement | Generic Electric Shredder | Diesel Mobile Shredder | TANA Hammerhead E |
|---|---|---|---|
| Drive System | Electric | Diesel | Fully Electric — Dual Motor |
| Rotor Speed | Varies | Varies | 37 RPM — high throughput |
| Nominal Torque | Varies | High | 310 kNm |
| Emissions | Zero direct | High — exhaust | Zero direct |
| Noise Level | Low | High | Significantly lower |
| Operating Cost | Low | High — diesel | Low — grid electric |
| Indoor Operation | Suitable | Limited | Fully suitable |
| Intelligent Control | Basic | Basic | TANA TCS automation |
| UAE Aftersales Support | Varies | Varies | Yes |
The TANA Hammerhead E is a premium heavy-duty electric industrial shredder and pricing varies based on motor configuration, knife specification, screen selection, and optional equipment. As the authorised TANA distributor in the UAE, Al Shirawi Enterprises provides detailed, transparent price quotations based on your specific operational requirements and waste stream. Contact our team today for a competitive quote for the TANA Hammerhead E in the UAE.
The TANA Hammerhead E operates at a higher rotor speed of 37 RPM and is optimised for high-throughput processing of lighter waste fractions — including MSW, green waste, wood, and light plastics — where maximum volume throughput is the primary objective. The TANA Shark E operates at a slower rotor speed of 26 RPM with higher torque output of 440 kNm, engineered for the toughest, most dense and abrasive waste streams where power and shredding force take priority over processing speed. Both models share the same dual electric motor configuration and rotor dimensions.
The Hammerhead E is optimised for high-volume processing of lighter and medium-density waste streams including municipal solid waste, green waste, wood and pallets, light plastics, mixed commercial and industrial waste, and construction debris. For the toughest, most abrasive waste streams such as whole tyres, steel cables, and ragger wire, the TANA Shark E or Shark ET may be more appropriate. Al Shirawi’s technical team can advise on the optimal TANA model for your specific UAE waste stream.
The Hammerhead E eliminates diesel fuel costs entirely, operating on UAE grid electricity at significantly lower energy cost per tonne. Combined with the absence of diesel engine servicing, exhaust system maintenance, and oil changes, total operating cost per tonne is substantially lower than equivalent diesel-powered shredding equipment across a typical operational lifecycle in the UAE.
Yes. The fully electric drive produces zero exhaust emissions, and the higher rotor speed design generates lower noise levels than diesel-powered alternatives making the Hammerhead E fully suitable for enclosed recycling facilities, material recovery facilities, and indoor transfer station operations across the UAE.
Lead times vary depending on current stock availability and machine configuration requirements. Al Shirawi Enterprises manages the complete procurement and delivery process for UAE customers, including all import logistics, customs clearance, site delivery, and electrical commissioning. Contact our team for current availability and estimated delivery timelines for the TANA Hammerhead E in the UAE.
Yes. Al Shirawi Enterprises maintains in-country stock of genuine TANA Hammerhead E rotor knives, wear components, and critical spare parts, and provides comprehensive aftersales support including preventive maintenance contracts, emergency breakdown response, and 24/7 technical assistance across all seven UAE emirates.
Share your requirement — our team will reach out shortly.