TANA Hammerhead D waste shredder
- Engine Power: 399 kW (535 bhp)
- Nominal Torque: 310 kNm
- Rotor length: 3000 mm
TANA Shark ET — Electric Stationary Waste Shredder with Diesel Auxiliary | UAE & GCC
The TANA Shark ET is an advanced electric stationary waste shredder combining the power and efficiency of an electric drive system with a Tier 4 Final and EU Stage V compliant auxiliary diesel engine delivering uninterrupted shredding performance even in sites with limited or unstable grid connectivity. Built on TANA’s proven slow-speed single-shaft technology, the Shark ET produces 440 kNm of nominal torque with precision screen-controlled output sizing, making it the most versatile electric recycling shredder available for industrial and municipal waste operations across the UAE and GCC.
With an extensive range of screen options from 50mm to 275mm including specialist tyre shredding screens the TANA Shark ET gives operators complete control over output particle size across every waste stream, from fine fraction municipal solid waste to bulky construction debris, wood, tyres, and mixed industrial material.
| Specification | Detail |
|---|---|
| Rated Power (SAE J1995) | 2 × 160 kW / 2 × 175 kW |
| Nominal Torque | 440 kNm |
| Rotor Length | 3,000 mm |
| Rotor Max. Speed | 26 RPM |
| Rotor Diameter | 920 mm |
| Rotor Knives | 33 knives or 44 knives |
| Screen Options | 50mm, 76mm, 3D 76mm, 90mm, 100mm, 109mm, 3D 109mm, 120mm, 130mm, 167mm, 220mm, 275mm, Special Tyre Shredding Screen |
| Auxiliary Engine Emissions | Tier 4 Final / EU Stage V |
| Drive System | Electric Stationary with Auxiliary Diesel |
| Shredding Technology | Slow-Speed Single-Shaft |
The Shark ET’s hybrid configuration gives operators the best of both worlds — the low operating cost and zero direct emissions of an electric primary drive, backed by a Tier 4 Final and EU Stage V compliant auxiliary diesel engine for uninterrupted operation during grid outages or remote site deployments. No production stoppage. No downtime risk.
With thirteen screen configurations ranging from 50mm to 275mm — plus a dedicated special tyre shredding screen — the TANA Shark ET adapts to virtually any waste stream and downstream process requirement. Whether your facility needs fine fraction RDF production, coarse wood chip for biomass, or precisely sized C&D material for secondary processing, the Shark ET delivers the exact output specification your operation demands.
The dual electric motor system generates 440 kNm of nominal torque at a controlled maximum rotor speed of 26 RPM, ensuring consistent throughput on the most demanding, dense, and abrasive waste streams without overloading or jamming. Slow-speed operation also minimises dust, noise, and knife wear — reducing maintenance costs and maximising productive uptime.
The Shark ET’s auxiliary diesel engine meets both Tier 4 Final and EU Stage V emission standards — the most stringent diesel emission regulations globally. This ensures the Shark ET qualifies for operation in environmentally regulated facilities across the UAE, GCC, and international markets without additional emission mitigation requirements.
Advanced onboard control systems continuously monitor load, rotor speed, and material feed rate, automatically adjusting operation to prevent overloading and optimise throughput. Intelligent reverse cycles clear blockages without operator intervention, minimising unplanned stoppages across continuous-operation facilities.
The TANA Shark ET is engineered for the widest range of waste streams encountered across UAE and GCC industrial parks, transfer stations, and material recovery facilities — including municipal solid waste, construction and demolition debris, wood and pallets, tyres, bulky industrial waste, and mixed commercial waste.
As the authorised TANA distribution and aftersales partner for the UAE and GCC, Al Shirawi Enterprises provides end-to-end support for the TANA Shark ET from initial site assessment and procurement through to installation, commissioning, operator training, and long-term maintenance.
Al Shirawi maintains in-country inventory of genuine TANA Shark ET knives, screens, rotor components, and wear parts eliminating international lead times and keeping your shredder running at peak productivity.
Our technical team manages full site installation, electrical and auxiliary engine commissioning, and screen configuration to match your specific waste stream and output requirements from day one.
Structured maintenance programmes cover scheduled knife and screen replacements, rotor inspections, auxiliary engine servicing, and full system diagnostics — protecting your investment and controlling operational costs.
Al Shirawi’s field service network covers all UAE emirates and key GCC markets, providing rapid-response breakdown support and technical guidance whenever your operation needs it.
The TANA Shark E electric stationary shredder is the preferred industrial waste processing solution for recycling facilities, transfer stations, and material recovery facilities across the UAE and GCC that demand high-torque, low-emission shredding with reliable continuous operation. The Shark E processes municipal solid waste for volume reduction and landfill diversion, construction and demolition debris, wood waste and pallets, tyres, and bulky industrial and commercial waste with consistent throughput across every shift. Its slow-speed single-shaft design and intelligent automation make it equally suited for mixed waste pre-processing, fraction preparation, and high-capacity shredding across UAE industrial parks, free zones, and large-scale transfer stations where operational efficiency and environmental compliance are equally critical.
| Requirement | Diesel Mobile Shredder | Standard Electric Shredder | TANA Shark ET |
|---|---|---|---|
| Primary Drive | Diesel | Electric only | Electric |
| Backup Power | None | None | Tier 4 / Stage V Diesel Auxiliary |
| Screen Options | Limited | Limited | 13 options + tyre screen |
| Emissions Compliance | Tier 4 / Stage V varies | Zero direct | Tier 4 Final / EU Stage V |
| Output Size Control | Basic | Basic | Precision screen-controlled |
| Indoor Operation | Limited | Fully suitable | Fully suitable |
| Operating Cost | High | Low | Low |
The Shark ET adds a Tier 4 Final and EU Stage V compliant auxiliary diesel engine to the Shark E’s electric drive system, providing backup power for uninterrupted operation during grid outages. It also features an extensive range of screen options from 50mm to 275mm for precise output particle size control a capability not available on the standard Shark E.
The Shark ET offers thirteen screen configurations: 50mm, 76mm, 3D 76mm, 90mm, 100mm, 109mm, 3D 109mm, 120mm, 130mm, 167mm, 220mm, and 275mm, plus a dedicated special tyre shredding screen. Al Shirawi’s technical team advises on the optimal screen selection based on your waste stream and downstream process requirements.
Yes. The auxiliary diesel engine meets both Tier 4 Final and EU Stage V emission standards the most stringent diesel emission regulations globally making the Shark ET fully compliant for operation across UAE and GCC industrial and municipal facilities.
The Shark ET handles municipal solid waste, construction and demolition debris, wood and pallets, tyres, bulky industrial waste, mixed commercial waste, and landfill material. The wide screen range enables precise output sizing for RDF, biomass, secondary material recovery, and landfill diversion applications.
Yes. Al Shirawi maintains in-country stock of genuine TANA Shark ET screens and rotor knives across all available configurations, ensuring fast availability and minimal downtime for UAE and GCC operations.
Al Shirawi provides comprehensive aftersales support including preventive maintenance contracts, emergency breakdown response, genuine spare parts supply, operator training, and 24/7 technical assistance across the UAE and key GCC markets.
Share your requirement — our team will reach out shortly.